ERA FHIR specification
1.0.0 - draft

ERA FHIR specification - Local Development build (v1.0.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: EraMedicationListStatusBasic - Detailed Descriptions

Draft as of 2026-04-22

Definitions for the EraMedicationListStatusBasic resource profile.

See the documentation on how to interpret the contents of this table

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Basic.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Basic.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.


A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

ShortProfiles this resource claims to conform to
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Control10..1*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed Value
{
  "profile" : "https://eradocumentation.atostek.com/StructureDefinition/EraMedicationListStatusBasic"
}
<profile value="https://eradocumentation.atostek.com/StructureDefinition/EraMedicationListStatusBasic"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Basic.meta.tag
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

ShortTags applied to this resource
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

Control0..*
BindingFor example codes, see CommonTagshttp://hl7.org/fhir/ValueSet/common-tags|4.0.1
(example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Basic.meta.tag. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ system
  • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

    8. Basic.meta.tag:cdaHeaderTemplateId
    Slice NamecdaHeaderTemplateId
    Definition

    Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

    ShortTags applied to this resource
    Comments

    The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

    Control0..1*
    BindingFor example codes, see CommonTagshttp://hl7.org/fhir/ValueSet/common-tags|4.0.1
    (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

    Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

    TypeCoding
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Basic.meta.tag:cdaHeaderTemplateId.system
    Definition

    The identification of the code system that defines the meaning of the symbol in the code.

    ShortIdentity of the terminology system
    Comments

    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to be unambiguous about the source of the definition of the symbol.

    Fixed Value
    {
      "system" : "http://resepti.kanta.fi/fhir/cdaHeaderTemplateId"
    }
    <system value="http://resepti.kanta.fi/fhir/cdaHeaderTemplateId"/>
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Basic.meta.tag:cdaHeaderTemplateId.code
    Definition

    CDA R2 header specification templateId (specification package version).


    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

    ShortCDA R2 header specification templateId (specification package version)Symbol in syntax defined by the system
    Control10..1
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to refer to a particular code in the system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Basic.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..01
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Basic.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..01
    BindingThe codes SHOULD be taken from CommonLanguageshttp://hl7.org/fhir/ValueSet/languages|4.0.1
    (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Basic.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..01
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Basic.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control10..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

      22. Basic.extension:effectiveTime
      Slice NameeffectiveTime
      Definition

      The creation time of a document

      ShortThe creation time of a document
      Control1..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Extension effectiveTime) (Extension Type: dateTime)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      24. Basic.extension:comment
      Slice Namecomment
      Definition

      Information on the explanation for the locking, reservation, special permit reservation, or their cancellation on the prescription.

      ShortAn explanation of the entry
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Extension comment) (Extension Type: string)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      26. Basic.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Basic.identifier
      Definition

      Identifier assigned to the resource for business purposes, outside the context of FHIR.

      ShortBusiness identifier
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Basic.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ system
      • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

        30. Basic.identifier:id
        Slice Nameid
        Definition

        Varaus/lukitus/niiden purku asiakirjan yksilöivä tunniste.


        Identifier assigned to the resource for business purposes, outside the context of FHIR.

        ShortAsiakirjan yksilöivä tunnisteBusiness identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control10..1*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Basic.identifier:id.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Basic.identifier:id.system
        Definition

        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed Value
        {
          "system" : "http://resepti.kanta.fi/fhir/id/id"
        }
        <system value="http://resepti.kanta.fi/fhir/id/id"/>
        ExampleGeneral: http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Basic.identifier:id.value
        Definition

        Varaus/lukitus/niiden purku asiakirjan yksilöivä OID-tunniste.


        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortAsiakirjan yksilöivä OID-tunnisteThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        ExampleGeneral: 123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Basic.identifier:setId
        Slice NamesetId
        Definition

        Varaus/lukitus/niiden purku asiakirjan alkuperäinen tunniste. Tunnisteella yhdistetään asiakirjan eri versiot.


        Identifier assigned to the resource for business purposes, outside the context of FHIR.

        ShortAlkuperäisen asiakirjan tunnisteBusiness identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control10..1*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Basic.identifier:setId.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Basic.identifier:setId.system
        Definition

        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed Value
        {
          "system" : "http://resepti.kanta.fi/fhir/id/setId"
        }
        <system value="http://resepti.kanta.fi/fhir/id/setId"/>
        ExampleGeneral: http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Basic.identifier:setId.value
        Definition

        Varaus/lukitus/niiden purku asiakirjan alkuperäinen OID-tunniste. Tunnisteella yhdistetään asiakirjan eri versiot.


        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortAlkuperäisen asiakirjan OID-tunnisteThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        ExampleGeneral: 123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Basic.code
        Definition

        Tieto siitä, millaisesta reseptisanomasta on kyse.


        Identifies the 'type' of resource - equivalent to the resource name for other resources.

        ShortReseptisanoman tyyppiKind of Resource
        Comments

        Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

        This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.

        Control1..1
        BindingFor example codes, see BasicResourceTypeshttp://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1
        (example to http://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1)

        Codes for identifying types of resources not yet defined by FHIR.

        TypeCodeableConcept
        Is Modifiertrue because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.
        Summarytrue
        Requirements

        Must be able to distinguish different types of Basic resources.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Basic.code.coding
        Definition

        Tieto siitä, millaisesta reseptisanomasta on kyse.


        A reference to a code defined by a terminology system.

        ShortReseptisanoman tyyppiCode defined by a terminology system
        Comments

        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control0..*
        TypeCoding
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Basic.code.coding.system
        Definition

        Sähköinen lääkemääräys - Reseptisanoman tyyppi koodiston OID.


        The identification of the code system that defines the meaning of the symbol in the code.

        ShortSähköinen lääkemääräys - Reseptisanoman tyyppi koodiston OIDIdentity of the terminology system
        Comments

        The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be unambiguous about the source of the definition of the symbol.

        Fixed Value
        {
          "system" : "urn:oid:1.2.246.537.5.40105.2006"
        }
        <system value="urn:oid:1.2.246.537.5.40105.2006"/>
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. Basic.code.coding.code
        Definition

        Sähköinen lääkemääräys - Reseptisanoman tyyppi koodiston arvo.


        A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

        ShortSähköinen lääkemääräys - Reseptisanoman tyyppi koodiston arvoSymbol in syntax defined by the system
        Control0..1
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to refer to a particular code in the system.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Basic.subject
        Definition

        Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

        ShortIdentifies the focus of this resource
        Comments

        Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

        Control0..01
        TypeReference(Resource)
        Is Modifierfalse
        Summarytrue
        Requirements

        Needed for partitioning the resource by Patient.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. Basic.created
        Definition

        Identifies when the resource was first created.

        ShortWhen created
        Control0..01
        Typedate
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows ordering resource instances by time.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. Basic.author
        Definition

        Viittaus Organization resurssiin, jossa tuodaan varauksen/lukituksen/niiden purun tehneen organisaation OID-tunnus.


        Indicates who was responsible for creating the resource instance.

        ShortViittaus Organization resurssiinWho created
        Control10..1
        TypeReference(EraMedicationListOrganization, Practitioner, PractitionerRole, Patient, RelatedPerson, Organization)referenced
        Is Modifierfalse
        Summarytrue
        Requirements

        Needed for partitioning the resource.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        See the documentation on how to interpret the contents of this table

        0. Basic
        2. Basic.meta
        4. Basic.meta.profile
        Control1..1
        Fixed Value
        {
          "profile" : "https://eradocumentation.atostek.com/StructureDefinition/EraMedicationListStatusBasic"
        }
        <profile value="https://eradocumentation.atostek.com/StructureDefinition/EraMedicationListStatusBasic"/>
        6. Basic.meta.tag
        SlicingThis element introduces a set of slices on Basic.meta.tag. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ system
        • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

          8. Basic.meta.tag:cdaHeaderTemplateId
          Slice NamecdaHeaderTemplateId
          Control0..1
          10. Basic.meta.tag:cdaHeaderTemplateId.system
          Control1..?
          Fixed Value
          {
            "system" : "http://resepti.kanta.fi/fhir/cdaHeaderTemplateId"
          }
          <system value="http://resepti.kanta.fi/fhir/cdaHeaderTemplateId"/>
          12. Basic.meta.tag:cdaHeaderTemplateId.code
          Definition

          CDA R2 header specification templateId (specification package version).

          ShortCDA R2 header specification templateId (specification package version)
          Control1..?
          14. Basic.implicitRules
          Control0..0
          16. Basic.language
          Control0..0
          18. Basic.text
          Control0..0
          20. Basic.extension
          Control1..?
          SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

            22. Basic.extension:effectiveTime
            Slice NameeffectiveTime
            Control1..1
            TypeExtension(Extension effectiveTime) (Extension Type: dateTime)
            Is Modifierfalse
            24. Basic.extension:comment
            Slice Namecomment
            Control0..1
            TypeExtension(Extension comment) (Extension Type: string)
            Is Modifierfalse
            26. Basic.identifier
            NoteThis is a business identifier, not a resource identifier (see discussion)
            SlicingThis element introduces a set of slices on Basic.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ system
            • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

              28. Basic.identifier:id
              Slice Nameid
              Definition

              Varaus/lukitus/niiden purku asiakirjan yksilöivä tunniste.

              ShortAsiakirjan yksilöivä tunniste
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control1..1
              30. Basic.identifier:id.system
              Control1..?
              Fixed Value
              {
                "system" : "http://resepti.kanta.fi/fhir/id/id"
              }
              <system value="http://resepti.kanta.fi/fhir/id/id"/>
              32. Basic.identifier:id.value
              Definition

              Varaus/lukitus/niiden purku asiakirjan yksilöivä OID-tunniste.

              ShortAsiakirjan yksilöivä OID-tunniste
              Control1..?
              34. Basic.identifier:setId
              Slice NamesetId
              Definition

              Varaus/lukitus/niiden purku asiakirjan alkuperäinen tunniste. Tunnisteella yhdistetään asiakirjan eri versiot.

              ShortAlkuperäisen asiakirjan tunniste
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control1..1
              36. Basic.identifier:setId.system
              Control1..?
              Fixed Value
              {
                "system" : "http://resepti.kanta.fi/fhir/id/setId"
              }
              <system value="http://resepti.kanta.fi/fhir/id/setId"/>
              38. Basic.identifier:setId.value
              Definition

              Varaus/lukitus/niiden purku asiakirjan alkuperäinen OID-tunniste. Tunnisteella yhdistetään asiakirjan eri versiot.

              ShortAlkuperäisen asiakirjan OID-tunniste
              Control1..?
              40. Basic.code
              Definition

              Tieto siitä, millaisesta reseptisanomasta on kyse.

              ShortReseptisanoman tyyppi
              42. Basic.code.coding
              Definition

              Tieto siitä, millaisesta reseptisanomasta on kyse.

              ShortReseptisanoman tyyppi
              44. Basic.code.coding.system
              Definition

              Sähköinen lääkemääräys - Reseptisanoman tyyppi koodiston OID.

              ShortSähköinen lääkemääräys - Reseptisanoman tyyppi koodiston OID
              Fixed Value
              {
                "system" : "urn:oid:1.2.246.537.5.40105.2006"
              }
              <system value="urn:oid:1.2.246.537.5.40105.2006"/>
              46. Basic.code.coding.code
              Definition

              Sähköinen lääkemääräys - Reseptisanoman tyyppi koodiston arvo.

              ShortSähköinen lääkemääräys - Reseptisanoman tyyppi koodiston arvo
              48. Basic.subject
              Control0..0
              50. Basic.created
              Control0..0
              52. Basic.author
              Definition

              Viittaus Organization resurssiin, jossa tuodaan varauksen/lukituksen/niiden purun tehneen organisaation OID-tunnus.

              ShortViittaus Organization resurssiin
              Control1..?
              TypeReference(EraMedicationListOrganization)referenced

              See the documentation on how to interpret the contents of this table

              0. Basic
              Definition

              Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

              ShortResource for non-supported content
              Control0..*
              Is Modifierfalse
              Summaryfalse
              Alternate NamesZ-resource, Extension-resource, Custom-resource
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              2. Basic.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. Basic.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Basic.meta.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              8. Basic.meta.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Basic.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 10. Basic.meta.versionId
                Definition

                The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

                ShortVersion specific identifier
                Comments

                The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

                Control0..1
                Typeid
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                12. Basic.meta.lastUpdated
                Definition

                When the resource last changed - e.g. when the version changed.

                ShortWhen the resource version last changed
                Comments

                This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

                Control0..1
                Typeinstant
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                14. Basic.meta.source
                Definition

                A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

                ShortIdentifies where the resource comes from
                Comments

                In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

                This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

                Control0..1
                Typeuri
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                16. Basic.meta.profile
                Definition

                A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

                ShortProfiles this resource claims to conform to
                Comments

                It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

                Control1..1
                Typecanonical(StructureDefinition)
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Fixed Value
                {
                  "profile" : "https://eradocumentation.atostek.com/StructureDefinition/EraMedicationListStatusBasic"
                }
                <profile value="https://eradocumentation.atostek.com/StructureDefinition/EraMedicationListStatusBasic"/>
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                18. Basic.meta.security
                Definition

                Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

                ShortSecurity Labels applied to this resource
                Comments

                The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                (extensible to http://hl7.org/fhir/ValueSet/security-labels|4.0.1)

                Security Labels from the Healthcare Privacy and Security Classification System.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                20. Basic.meta.tag
                Definition

                Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

                ShortTags applied to this resource
                Comments

                The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

                Control0..*
                BindingFor example codes, see CommonTags
                (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

                Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Basic.meta.tag. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ system
                • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

                  22. Basic.meta.tag:cdaHeaderTemplateId
                  Slice NamecdaHeaderTemplateId
                  Definition

                  Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

                  ShortTags applied to this resource
                  Comments

                  The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

                  Control0..1
                  BindingFor example codes, see CommonTags
                  (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

                  Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

                  TypeCoding
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  24. Basic.meta.tag:cdaHeaderTemplateId.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  26. Basic.meta.tag:cdaHeaderTemplateId.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Basic.meta.tag.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 28. Basic.meta.tag:cdaHeaderTemplateId.system
                    Definition

                    The identification of the code system that defines the meaning of the symbol in the code.

                    ShortIdentity of the terminology system
                    Comments

                    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                    Control1..1
                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Need to be unambiguous about the source of the definition of the symbol.

                    Fixed Value
                    {
                      "system" : "http://resepti.kanta.fi/fhir/cdaHeaderTemplateId"
                    }
                    <system value="http://resepti.kanta.fi/fhir/cdaHeaderTemplateId"/>
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    30. Basic.meta.tag:cdaHeaderTemplateId.version
                    Definition

                    The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                    ShortVersion of the system - if relevant
                    Comments

                    Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                    NoteThis is a business version Id, not a resource version Id (see discussion)
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    32. Basic.meta.tag:cdaHeaderTemplateId.code
                    Definition

                    CDA R2 header specification templateId (specification package version).

                    ShortCDA R2 header specification templateId (specification package version)
                    Control1..1
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Need to refer to a particular code in the system.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    34. Basic.meta.tag:cdaHeaderTemplateId.display
                    Definition

                    A representation of the meaning of the code in the system, following the rules of the system.

                    ShortRepresentation defined by the system
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    36. Basic.meta.tag:cdaHeaderTemplateId.userSelected
                    Definition

                    Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                    ShortIf this coding was chosen directly by the user
                    Comments

                    Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                    Control0..1
                    Typeboolean
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    38. Basic.implicitRules
                    Definition

                    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                    ShortA set of rules under which this content was created
                    Comments

                    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                    Control0..0
                    Typeuri
                    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    40. Basic.language
                    Definition

                    The base language in which the resource is written.

                    ShortLanguage of the resource content
                    Comments

                    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                    Control0..0
                    BindingThe codes SHOULD be taken from CommonLanguages
                    (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                    A human language.

                    Additional BindingsPurpose
                    AllLanguagesMax Binding
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    42. Basic.text
                    Definition

                    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                    ShortText summary of the resource, for human interpretation
                    Comments

                    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                    Control0..0
                    TypeNarrative
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesnarrative, html, xhtml, display
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    44. Basic.contained
                    Definition

                    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                    ShortContained, inline Resources
                    Comments

                    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                    Control0..*
                    TypeResource
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesinline resources, anonymous resources, contained resources
                    46. Basic.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control1..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

                      48. Basic.extension:effectiveTime
                      Slice NameeffectiveTime
                      Definition

                      The creation time of a document

                      ShortThe creation time of a document
                      Control1..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(Extension effectiveTime) (Extension Type: dateTime)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      50. Basic.extension:comment
                      Slice Namecomment
                      Definition

                      Information on the explanation for the locking, reservation, special permit reservation, or their cancellation on the prescription.

                      ShortAn explanation of the entry
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(Extension comment) (Extension Type: string)
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      52. Basic.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                      Summaryfalse
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      54. Basic.identifier
                      Definition

                      Identifier assigned to the resource for business purposes, outside the context of FHIR.

                      ShortBusiness identifier
                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      SlicingThis element introduces a set of slices on Basic.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ system
                      • Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

                        56. Basic.identifier:id
                        Slice Nameid
                        Definition

                        Varaus/lukitus/niiden purku asiakirjan yksilöivä tunniste.

                        ShortAsiakirjan yksilöivä tunniste
                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control1..1
                        TypeIdentifier
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        58. Basic.identifier:id.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        60. Basic.identifier:id.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Basic.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 62. Basic.identifier:id.use
                          Definition

                          The purpose of this identifier.

                          Shortusual | official | temp | secondary | old (If known)
                          Comments

                          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                          Control0..1
                          BindingThe codes SHALL be taken from IdentifierUse
                          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                          Identifies the purpose for this identifier, if known .

                          Typecode
                          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          64. Basic.identifier:id.type
                          Definition

                          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                          ShortDescription of identifier
                          Comments

                          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                          Control0..1
                          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                          (extensible to http://hl7.org/fhir/ValueSet/identifier-type|4.0.1)

                          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Allows users to make use of identifiers when the identifier system is not known.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          66. Basic.identifier:id.system
                          Definition

                          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                          ShortThe namespace for the identifier value
                          Comments

                          Identifier.system is always case sensitive.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                          Fixed Value
                          {
                            "system" : "http://resepti.kanta.fi/fhir/id/id"
                          }
                          <system value="http://resepti.kanta.fi/fhir/id/id"/>
                          ExampleGeneral: http://www.acme.com/identifiers/patient
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          68. Basic.identifier:id.value
                          Definition

                          Varaus/lukitus/niiden purku asiakirjan yksilöivä OID-tunniste.

                          ShortAsiakirjan yksilöivä OID-tunniste
                          Comments

                          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                          Control1..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          ExampleGeneral: 123456
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          70. Basic.identifier:id.period
                          Definition

                          Time period during which identifier is/was valid for use.

                          ShortTime period when id is/was valid for use
                          Control0..1
                          TypePeriod
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          72. Basic.identifier:id.assigner
                          Definition

                          Organization that issued/manages the identifier.

                          ShortOrganization that issued id (may be just text)
                          Comments

                          The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                          Control0..1
                          TypeReference(Organization)
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          74. Basic.identifier:setId
                          Slice NamesetId
                          Definition

                          Varaus/lukitus/niiden purku asiakirjan alkuperäinen tunniste. Tunnisteella yhdistetään asiakirjan eri versiot.

                          ShortAlkuperäisen asiakirjan tunniste
                          NoteThis is a business identifier, not a resource identifier (see discussion)
                          Control1..1
                          TypeIdentifier
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          76. Basic.identifier:setId.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          78. Basic.identifier:setId.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Basic.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 80. Basic.identifier:setId.use
                            Definition

                            The purpose of this identifier.

                            Shortusual | official | temp | secondary | old (If known)
                            Comments

                            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                            Control0..1
                            BindingThe codes SHALL be taken from IdentifierUse
                            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                            Identifies the purpose for this identifier, if known .

                            Typecode
                            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            82. Basic.identifier:setId.type
                            Definition

                            A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                            ShortDescription of identifier
                            Comments

                            This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                            Control0..1
                            BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                            (extensible to http://hl7.org/fhir/ValueSet/identifier-type|4.0.1)

                            A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows users to make use of identifiers when the identifier system is not known.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            84. Basic.identifier:setId.system
                            Definition

                            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                            ShortThe namespace for the identifier value
                            Comments

                            Identifier.system is always case sensitive.

                            Control1..1
                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                            Fixed Value
                            {
                              "system" : "http://resepti.kanta.fi/fhir/id/setId"
                            }
                            <system value="http://resepti.kanta.fi/fhir/id/setId"/>
                            ExampleGeneral: http://www.acme.com/identifiers/patient
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            86. Basic.identifier:setId.value
                            Definition

                            Varaus/lukitus/niiden purku asiakirjan alkuperäinen OID-tunniste. Tunnisteella yhdistetään asiakirjan eri versiot.

                            ShortAlkuperäisen asiakirjan OID-tunniste
                            Comments

                            If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                            Control1..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            ExampleGeneral: 123456
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            88. Basic.identifier:setId.period
                            Definition

                            Time period during which identifier is/was valid for use.

                            ShortTime period when id is/was valid for use
                            Control0..1
                            TypePeriod
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            90. Basic.identifier:setId.assigner
                            Definition

                            Organization that issued/manages the identifier.

                            ShortOrganization that issued id (may be just text)
                            Comments

                            The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                            Control0..1
                            TypeReference(Organization)
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            92. Basic.code
                            Definition

                            Tieto siitä, millaisesta reseptisanomasta on kyse.

                            ShortReseptisanoman tyyppi
                            Comments

                            Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

                            This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.

                            Control1..1
                            BindingFor example codes, see BasicResourceTypes
                            (example to http://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1)

                            Codes for identifying types of resources not yet defined by FHIR.

                            TypeCodeableConcept
                            Is Modifiertrue because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.
                            Summarytrue
                            Requirements

                            Must be able to distinguish different types of Basic resources.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            94. Basic.code.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            96. Basic.code.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Basic.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 98. Basic.code.coding
                              Definition

                              Tieto siitä, millaisesta reseptisanomasta on kyse.

                              ShortReseptisanoman tyyppi
                              Comments

                              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                              Control0..*
                              TypeCoding
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows for alternative encodings within a code system, and translations to other code systems.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              100. Basic.code.coding.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              102. Basic.code.coding.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Basic.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 104. Basic.code.coding.system
                                Definition

                                Sähköinen lääkemääräys - Reseptisanoman tyyppi koodiston OID.

                                ShortSähköinen lääkemääräys - Reseptisanoman tyyppi koodiston OID
                                Comments

                                The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                Control0..1
                                Typeuri
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need to be unambiguous about the source of the definition of the symbol.

                                Fixed Value
                                {
                                  "system" : "urn:oid:1.2.246.537.5.40105.2006"
                                }
                                <system value="urn:oid:1.2.246.537.5.40105.2006"/>
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                106. Basic.code.coding.version
                                Definition

                                The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                ShortVersion of the system - if relevant
                                Comments

                                Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                NoteThis is a business version Id, not a resource version Id (see discussion)
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                108. Basic.code.coding.code
                                Definition

                                Sähköinen lääkemääräys - Reseptisanoman tyyppi koodiston arvo.

                                ShortSähköinen lääkemääräys - Reseptisanoman tyyppi koodiston arvo
                                Control0..1
                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need to refer to a particular code in the system.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                110. Basic.code.coding.display
                                Definition

                                A representation of the meaning of the code in the system, following the rules of the system.

                                ShortRepresentation defined by the system
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                112. Basic.code.coding.userSelected
                                Definition

                                Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                ShortIf this coding was chosen directly by the user
                                Comments

                                Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                Control0..1
                                Typeboolean
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                114. Basic.code.text
                                Definition

                                A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                ShortPlain text representation of the concept
                                Comments

                                Very often the text is the same as a displayName of one of the codings.

                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                116. Basic.subject
                                Definition

                                Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

                                ShortIdentifies the focus of this resource
                                Comments

                                Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

                                Control0..0
                                TypeReference(Resource)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Needed for partitioning the resource by Patient.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                118. Basic.created
                                Definition

                                Identifies when the resource was first created.

                                ShortWhen created
                                Control0..0
                                Typedate
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Allows ordering resource instances by time.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                120. Basic.author
                                Definition

                                Viittaus Organization resurssiin, jossa tuodaan varauksen/lukituksen/niiden purun tehneen organisaation OID-tunnus.

                                ShortViittaus Organization resurssiin
                                Control1..1
                                TypeReference(EraMedicationListOrganization)referenced
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Needed for partitioning the resource.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))